watch soccer via Sling Orange

How to Turn an Old Satellite Dish Into a TV Antenna

  

  Oops! Wait – don’t throw away that old satellite dish. You can actually turn it into a TV antenna and enjoy some TV shows like a cable-owner!

  We all have that old, stuffy, and seemingly useless prop in your backyard. If we look at them closely, they’re not that useless after all.

  Made of fiberglass, metal, or aluminum, the satellite dish is a curved antenna that’s actually designed for that sole purpose: to receive signals to be transmitted to the television.

  Judging from its aluminum/fiberglass material, satellite dishes are meant to last longer than you think. Anyway, you won’t have to be using the dish, but rather the cable attached to it.

  So, don’t throw that stuff away and do our tips on how to turn an old satellite dish into a tv antenna.

  Turn that signal on and let’s get going…

  You can turn an old satellite dish into a TV antenna by doing a bunch of simple steps involving a few dismantling actions, some attachments, etc. With complete tools, following our simple tips, you will be able to turn that old satellite or directv dish into a TV antenna and enjoy your favorite TV shows tonight!

  Here are some important tools you will need for the revamp:

  Cable cutter (Click here to check our favorite cable cutter)Electrical tape (Click here to view our best electrical tape)Over-the-air (OTA) Antenna (Check out our favorite OTA antenna)Screwdrivers (Click here to check our favorite screwdrivers)Tape measure (Click here to see our top tape measure)Digital TV signal finder (Click here to check our top-rated signal finder tool)Drill (Click here to view our best drill)Scissors (Click here to view our top pair of scissors)Fitting adapter?Level (Click here to view our top-rated level tool)

  Does the old satellite dish-turned-into-antenna promise free TV shows?

  No. Not the dish per se. The point of these tips is to use the dish’s mast by attaching it to the already-fixed grounded coax cables. Once installed, the entire will have an HDTV antenna.

  The OTA/HDTV antenna is the one responsible for providing you free TV channels.

  Let’s not take you long; let’s proceed finally to the tips…

  Tip #1. Properly Dish Out the Dish

  Remove the covering from the tip of the dish arm. This is also called low-noise block (LNB).?Look for and pull out the head of the coax cable hidden inside the dish arm.?Dismantle this cable from the dish arm using a screwdriver.?Keep the cable as you will be using it later.?Unscrew the bolts to take off the main dish material from the mast it has been attached.?Do not throw away the dish as you can use it for several purposes in and outside the home.

  How to Turn an Old Satellite Dish Into a TV Antennashutterstock

  Tip #2. Set-Up Your OTA Antenna

  Refer to the user manual and our tips on how to turn an old satellite dish into a tv antenna to know how your antenna works.Some OTA antennas are fully-assembled when delivered; some are not. For the antennas that need assembling, begin by securing the dipoles. Use a screwdriver to lock them in. Put in electrical tape for extra-security. This should also maximise the uses for old directv satellite dish.Use electrical tape to hold some wires appendages into the structure. Use a level tool to keep the installation at a perfectly-balanced angle.

  But how do I choose the best OTA antenna?

  For you to be able to choose the best OTA antenna, determine first and foremost, if it has the farthest range capacity to reach TV towers beyond the distance.

  The second feature that you should be looking for from an OTA antenna is its directivity. Directivity is the OTA antenna’s capacity to receive overlapping signals from one direction and resist signal interferences from the opposite direction.

  OTA antennas come in quite a number of designs. It is important to know what works for you based on:

  The location of your homeDirection of signals via omnidirectional, unidirectional, or multidirectional sourcesFeasibility of its reception range vis a vis the capacity of your cable.

  Tip #3. Mount Your OTA Antenna.

  To complete the tips on how to turn an old satellite dish into a TV antenna, install your OTA antenna on the same mounting bracket that previously supported your satellite dish. If the antenna does not fit the mounting bracket, merge them using a fitting adapter instead.

  Turn on your digital TV signal finder to make your own tv antenna.Position your signal finder to locations where you feel television towers concentrate. Whenever the signal finder detects an UHF, its digital cells increase by 50%; if it detects a VHF, the rate increases by another 20%. But if it hits just the perfect spot (in-between VHF and UHF location), then it goes full 100. Although this rarely happens so that most rates would only settle within 70-80, it wouldn’t hurt to try. Just keep in mind that the higher the rate, the more free channels are received.Mark the exact direction where numbers ring high. Fix the antenna facing in that direction.

  Tip #4. Set-Up a New Cable Link

  Remember the coaxial cable you dismantled from your satellite dish? Connect its head to your newly set-up OTa antenna. Go to its receiving end (usually attached to the satellite receiver hardware). Unplug it. Now, transfer the receiver end directly to your TV. Enjoy….

  Continue reading to hear our final thoughts…

  The old satellite dish in your backyard is certainly not useless. It comes especially handy with our tips on how to turn an old satellite dish into a tv antenna. You can also use it to maximize your HDTV (OTA) antenna connection to receive more free TV channels.

  Instead of throwing it away and polluting the environment with non-biodegradable stuff, reuse its mast to hold your all-new TV antenna in place.

  The actual dish material should not also be thrown because it is incredibly useful for redecorating your indoor and outdoor space.

  The next time you come across this material, think again.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *